Nippon Bodelac 9000 Undercoat

Description
A high opacity and high solids coating that will effectively hide the substrate and impart a good film build to the overall coating system. Widely used as an undercoat over timber and metal.

Type
Oil-modified resin.

Uses
Specially designed undercoat for appropriately primed metals and woods such as:

*Non-ferrous metals must be primed with Nippon Vinilex 120 Active Primer.

Finish
Matt

Colour
White

Features
Quick dry
High opacity for easy coverage
Promote good intercoating adhesion
Economical and easy to use.

Application Data

Method
Brush, roller or air spray

Paint Consumption
Theorectical - 18.5 sq.m / litre (30 microns DFT)

Dilution
Solvent - Nippon Bodelac 9000 General Purpose Thinner
Brush - 5 ~ 10%
Roller - 5 ~ 10%
Air spray - 10 ~ 20%

Surface Preparation
Metal:
Surface must be clean and dry, free from grease, rust and foreign matter.
New metal - prime with Nippon Bodelac 9000 L/Z Primer.
Repaint - spot prime exposed metal with above primer.
Non-ferrous - prime with Nippon Vinilex 120 Active Primer.
All exposed metal must immediately be primed to prevent corrosion.

Wood:
Sanding to a smooth clean surface
removing dust, dirt and other foreign matter
allowing ample time for wood to dry
removing unstable matter
priming wth Nippon Bodelac 9000 Aluminium Wood primer.

Film Thickness
A Dry Film Thickness of 35 ~ 40 microns per coat is recommended.

Drying Time
Touch dry - 40 minutes at 30 Degrees Celcius.

Overcoating Time
16 hours minimum